This model has a car that lifts the occupied wheelchair and a passenger. The occupied wheelchair rolls on the car platform and locks into position. There is a seat behind the wheelchair for a passenger.
The Accessible Deer stand is all aluminum and lightweight. The entire stand is powder coated with an olive drab color.
The car capacity is 600 pounds and weighs 105 pounds. The car can be removed for easier loading. The ladder folds in half and weighs 68 pounds. Fold up length is 6’8-1/2” x 30-1/2” wide with car removed. The height to extended seat is 10’3”.
A cordless drill drives the car. A Dewalt brand CD920KA with 510 unit watts max power cordless drill is included. The drill is easily attached to a fixture and the wheelchair occupant only has to squeeze the trigger. If necessary, there can be a remote switch for the occupant of the wheelchair or the passenger seated behind the wheelchair for an additional fee.
There is a detachable tow to use for pulling behind a truck or four-wheeler. It can also be easily pulled by hand.
This model has a swivel seat where the wheelchair rolls next to the seat and the person transfers from the wheelchair to the swivel seat.
The Accessible Deer stand is all aluminum and lightweight. The entire stand is powder coated with an olive drab color.
The car capacity is 400# and weighs 44 pounds. The car can be removed for easier loading. The ladder folds in half and weighs 80 pounds. Fold up length is 8’4” x 24” wide with car removed. The height to extended seat is 13’8”.
A cordless drill drives the car. I recommend using Rigid brand ½” 18 volt 550 inch pounds force cordless drill (Model R8411503). This is not supplied and can be found at Home Depot.
There is a detachable tow to use for pulling behind a truck or four-wheeler. It can also be easily pulled by hand.
The stand anchors with a ‘V’ shaped aluminum plate with ratchet hold down straps (included) that can be secured without ascending the ladder. The winch is 2000# worm gear driven so there is no need for a brake; however there is a safety to lock the car in place if the strap should break. The nylon winch strap has a 4000# capacity. A deer can be transported by strapping it to the ladder.
The stand erects in less than two minutes and can taken down and put in the back of a small pick-up truck without any tools. This stand is completely weather proof except for the winch which is protected from the weather and sun and can be left erected for years. This stand will last a lifetime with all aluminum and stainless steel hardware, except for the winch.
The stand anchors with a ‘V’ shaped aluminum plate with ratchet hold down straps (included) that can be secured without ascending the ladder. The winch is 2000# worm gear driven so there is no need for a brake; however there is a safety to lock the car in place if the strap should break. The nylon winch strap has a 4000# capacity. A deer can be transported by strapping it to the ladder.
The stand erects in less than two minutes and can taken down and put in the back of a small pick-up truck without any tools. This stand is completely weather proof except for the winch which is protected from the weather and sun and can be left erected for years. This stand will last a lifetime with all aluminum and stainless steel hardware, except for the winch.